M843NW3
Lieferbare Versionen:
10 kW @ 1500 rpm & 50 Hz
12 kW @ 1800 rpm & 60 Hz
The M843NW3 is small in size but not in heart.
The M843NW3 comes with all the time-tested features you expect on a Northern Lights. A simple, reliable cooling system that minimizes belts, hoses and gaskets. A relay based DC electrical system without expensive printed circuit boards.
Single side service accessibility. Crankcase oil vapor trap system and welded drip pan base to keep your engine room as clean as the 843’s white polyurethane paint job.
The 843 also plays well with others. Team it up with a larger Northern Lights set. The 843 will shoulder the light load hours and let its big buddy take a rest. Since it only uses 0.62 gph of fuel at half load it will rest your wallet too.
This little workhorse takes multi-tasking to a whole new level. Clean, stable electricity out of one end and accessory driving horsepower out the other. All you need is the optional, front power take off and electric clutch. With a touch of a button you will have hydraulic power. No need to start up that main engine just to run a deck winch.
Clean inside and out, the M843NW3 meets the US EPA Tier III emission requirements. What more could you ask from a guy that is only two feet tall?
Technische Daten
Allgemein
- Aussenmaße ohne Gehäuse: L 100 x B 58 x H 65 cm
- Trockengewicht dito: 380 kg
- Umweltklassifizierung TIER III (Stufe 3 nach
US EPA)
- Nach CE und Lloyds Register of Shipping zugelassen
- Auto-STOP bei Ölruckmangel oder Überhitzung in Motor oder Auspuff
- Stahlwanne mit integrierter Ölbilge
Motor
- 3 Zylinder Lugger Reihenmotor (auch ein Northern Lights Produkt)
- 1.5 Liter Hubraum, Bohrung 84mm, Hub 90mm
- Saugmotor, mechanische Einspritzpumpe
- Mechanische Brennstoff-Entlüftungspumpe
- Dieselverbrauch: 1,9/3,8 lph bei Halblast, 2.3/4.5 lph bei Vollast (50/60 Hz)
- Ölvolumen 5.5 Liter, 200 Stunden Wechselintervall, Öl-Absaugevorrichtung
- Süßwasserkühlung mit Expansionstank und Nickel-Kupfer-Wärmetauscher
- Wassergekühlter Auspuffkrümmer
DC Elektrik
- DC Relais Steuersystem, keine unreparierbaren gedruckten Schaltungen
- 12V Startermotor und 12V Lichtmachine zum Laden
- Control-Panel S-1B extern mit 6m Kabel
Generator
- Der bürstenlose Generator ist ein Northern Lights eigenes Produkt
- 1-phasig mit Wechselstrom Ausgang
- 10 kW 50 Hz, 1500 RPM, 220 V - 45 A
ODER
- 12 kW 60 Hz, 1800 RPM, 120/240 V - 50 A, 120 V - 100 A
- Externer automatischer Spannungsregler, maximal +-1% Abweichung
Modellvarianten optional
- Kielkühlung statt Wärmetauscher, diverse Optionen
- DC-System 24 V statt 12 V, und/oder isolierte Erdung
- 12V - 51A Drehstrom-Lichtmachine
- Diverse Auspuff-Optionen, nass oder mit Gas / Wasser Separator
- Generator mit 3-Phasen-Drehstrom statt 1-Phasen-Wechselstrom
- Aluminium Basisrahmen
- Weiteres auf Anfrage
Lieferbares Zubehör
- Lärmschutzgehäuse
- Bis zu 6 Control Panels anschließbar, maximale Kabellänge 33m
- WaveNet Digital Control
- PTO (Nebenabtrieb)
- Diverse zusätzliche Sicherheits-Systeme
Weitere Informationen und Downloads
M843NW3 - Produkt-Prospekt und technische Daten
Optionale Control Panels für den M843NW3
Digital WaveNet Control für den M843NW3
L749 Schälldämmhauben-Prospekt für den M843NW3
Sonstiges optionales Zubehör für den M843NW3
M843NW3 Eigner-Handbuch
Northern Lights Filter Quick-Find Liste
Northern Lights On-Board Ersatzteil Kit Vorschläge
M843NW3 Ersatzteil-Katalog
Nachfolgend PDF Dateien mit Installations- bzw. Ansichtszeichnungen. DWG Dateien im 2D Format und meist auch 3D Modelle sind verfügbar. Bitte anfordern!
Ansichtszeichnungen des M843NW3 als PDF Datei
Ansichtszeichnungen der Schalldämmhaube L749 für M843NW3 als PDF Datei
zurück